Suzuki 2006 SX4, Service Manual

Page: 286 / 1478

1D-55 Engine Mechanical:
Main Bearings, Crankshaft and Cylinder Block Components
S6RW0C1406039
I7RW01140065-01
1. Cylinder block 10. Flywheel : Tighten 40 N
⋅
m (4.0 kgf-m, 29.0 lb-ft), 0
N
⋅
m (0 kgf-m, 0 lb-ft), 40 N
⋅
m (4.0 kgf-m,
29.0 lb-ft) and 58 N
⋅
m (5.8 kgf-m, 42.0
lb-ft) by the specified procedure.
2. Lower crankcase
: Apply sealant 99000-31250 to mating
surface.
11. Water pump : Tighten 26 N
⋅
m (2.6 kgf-m, 19.0 lb-ft) by
the specified procedure.
3. Crankshaft 12. Heater outlet pipe : 70 N
⋅
m (7.0 kgf-m, 51.0 lb-ft)
4. O-ring 13. CKP sensor : 11 N
⋅
m (1.1 kgf-m, 8.0 lb-ft)
5. Oil pump chain 14. Crankcase bolt (10 mm thread diameter) : 22 N
⋅
m (2.2 kgf-m, 16.0 lb-ft)
6. Main bearing
: Do not apply engine oil between cylinder
block and bearing, between lower crankcase
and bearing. Upper half of bearing has an oil
groove.
15. Crankcase bolt (8 mm thread diameter) : 3 N
⋅
m (0.3 kgf-m, 2.5 lb-ft)
7. Thrust bearing 16. Flywheel or drive plate bolt : Do not reuse.