Suzuki 2006 SX4, Service Manual

Page: 1008 / 1478

8B-43 Air Bag System:
DTC B1042: Passenger Air Bag Circuit Low Resistance
S6RW0C8204023
Wiring Diagram
Refer to “DTC B1041: Passenger Air Bag Circuit High Resistance”.
DTC Detecting Condition and Trouble Area
DTC Troubleshooting
DTC detecting condition Trouble area
Passenger air bag circuit is less than 0.9
Ω
for more than
4 sec.
• Passenger air bag circuit
• Passenger air bag module
• SDM
Step Action Yes No
1 Was “Air Bag Diagnostic System Check Flow” performed? Go to Step 2. Go to “Air Bag
Diagnostic System
Check Flow”.
2 Passenger air bag circuit check
1) Remove passenger air bag (inflator) module referring to
“Passenger Air Bag (Inflator) Module Removal and
Installation”.
2) Check for proper connection to passenger air bag
(inflator) module at terminals in “G259” connector.
3) If OK, then connect special tools (A), (B) and (C) to
“G259” connector.
Special tool
(A): 09932–76010
(B): 09932–75010
(C): 09932–78310
4) Check SDM for DTC.
With ignition switch ON, is DTC B1042 indicated?
Go to Step 3. Replace passenger air
bag (inflator) module
referring to “Passenger
Air Bag (Inflator) Module
Removal and
Installation”.
“G259”
(B)
(C)
(A)
STEERING WHEEL
I7RW01821025-02