Suzuki 2006 SX4, Service Manual

Page: 785 / 1478

Clutch: 5C-11
Clutch Cover and Clutch Disc Inspection
S6RW0C5306013
Clutch Disc
Measure depth of rivet head depression, i.e. distance
between rivet head and facing surface.
If depression is found to have reached service limit at
any of rivet holes (2), replace clutch disc assembly (1).
Rivet head depth
Standard: 1.65 – 2.25 mm (0.06 – 0.09 in.)
Limit: 0.5 mm (0.02 in.)
Clutch Cover
1) Check diaphragm spring (1) for abnormal wear or
damage.
2) Inspect pressure plate (2) for wear or heat spots.
3) If abnormality is found, replace clutch cover.
Do not disassemble it into diaphragm spring and
pressure plate.
Specifications
Tightening Torque Specifications
S6RW0C5307001
NOTE
The specified tightening torque is also described in the following.
“Clutch Cover, Clutch Disc and Flywheel Components”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fasteners Information in Section 0A”.
I4RS0A530019-01
I3RM0A530015-01
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lb-ft
Clutch bleeder plug 5 0.5 4.0 )
CPP switch lock nut 7.5 0.75 5.5 )
Clutch master cylinder nut 13 1.3 9.5 )
Clutch operating cylinder assembly mounting
bolt
10 1.0 7.5
)
Clutch fluid pipe flare nut 16 1.6 11.5 )
Flywheel bolt 70 7.0 51.0 )
Clutch cover bolt 23 2.3 17.0 )