Suzuki 2006 SX4, Service Manual

Page: 265 / 1478

Engine Mechanical: 1D-34
Wear of Tappet and Shim
Check tappet and shim for pitting, scratches, or damage.
If any malcondition is found, replace.
Measure cylinder head bore and tappet outside diameter
to determine cylinder head-to-tappet clearance. If
clearance exceeds limit, replace tappet or cylinder head.
Cylinder head bore and tappet outside diameter
Oil Relief Valve
Check oil relief valve for clogging and ball for being
stuck.
Item Standard Limit
Tappet outside
diameter [A] 32.456 – 32.472 mm
(1.2778 – 1.2784 in.)
—
Cylinder head bore
[B] 32.500 – 32.525 mm
(1.2795 – 1.2805 in.)
—
Cylinder head to
tappet clearance 0.028 – 0.069 mm
(0.0011 – 0.0027 in.)
0.15 mm
(0.0059 in.)
I2RH0B140085-01
I5JB0A142038-01
I2RH01140111-01