Engine General Information and Diagnosis: 1A-157
Troubleshooting
NOTE
Before using the following flow chart, chart check to make sure that battery voltage is higher than 11 V.
If battery voltage is low, pressure becomes lower than specification even if fuel pump and line are in
good condition.
Step
Action
Yes
No
1
Fuel pump operating sound check
1) Remove fuel filler cap and then turn ON ignition switch.
Can you hear operating sound?
Go to Step 2.
Go to “Fuel Pump and
Its Circuit Check”.
2
Fuel pressure check
1) Check fuel pressure referring to “Fuel Pressure
Inspection in Section 1G”.
Is check result satisfactory?
Go to Step 3.
Go to Step 6.
3
Fuel pressure check
1) Start engine and warm it up to normal operating
temperature.
2) Keep engine speed at 4000 rpm.
Does fuel pressure show about the same value as Step 2?
Go to Step 4.
Go to Step 8.
4
Fuel line check
1) Check fuel pipe, fuel hose and joint for fuel leakage.
Are they in good condition?
Go to Step 5.
Repair or replace
defective part.
5
Fuel line check
1) Check fuel pipe, fuel hose and joint for damage or
deform.
Are they in good condition?
Fuel system is in good
condition.
Repair or replace
damaged or damaged
part.
6
Was fuel pressure higher than specification in Step 2?
Go to Step 7.
Go to Step 8.
7
Fuel line check
1) Check fuel pipe, fuel hose and joint for damage or
deform.
Are they in good condition?
Faulty fuel pressure
regulator.
Repair or replace
damaged or damaged
part.
8
Fuel line check
1) Check fuel pipe, fuel hose and joint for damage or
deform.
Are they in good condition?
Clogged fuel filter, faulty
fuel pump, faulty fuel
pressure regulator or
fuel leakage from hose
connection in fuel tank.
Repair or replace
defective part.
Summary of Contents for 2006 SX4
