Air Conditioning System: Manual Type 7B-16
Abnormal Noise from Condenser Assembly
Abnormal Noise from Crankshaft Pulley
Abnormal Noise from Tension Pulley
Abnormal Noise from A/C Evaporator
Abnormal Noise from Blower Motor
Condition
Possible cause
Correction / Reference Item
Considerable vibration in
condenser assembly
Resonance from condenser assembly
bracket and body
Firmly insert a silencer between condenser
assembly bracket and body.
Condition
Possible cause
Correction / Reference Item
A large rattling noise is
heard at idle or sudden
acceleration
Loosen crankshaft pulley bolt
Retighten bolt.
Condition
Possible cause
Correction / Reference Item
Clattering noise is heard
from pulley
Worn or damaged bearing
Replace tension pulley.
Pulley cranks upon
contact
Cracked or loose bracket
Replace or retighten bracket.
Condition
Possible cause
Correction / Reference Item
Whistling sound is heard
from A/C evaporator
Depending on the combination of the
interior / exterior temperatures, engine
rpm and refrigerant pressure, the
refrigerant flowing out of the expansion
valve may, under certain conditions,
make a whistling sound
At times, slightly decreasing refrigerant volume
may stop this noise.
Inspect expansion valve and replace if faulty.
Condition
Possible cause
Correction / Reference Item
Blower motor emits a
chirping sound in
proportion to its speed of
rotation
Worn or damaged motor brushes or
commutator
Replace blower motor.
Fluttering noise or large
droning noise is heard
from blower motor
Leaves or other debris introduced from
fresh air inlet to blower motor
Remove debris and make sure that the screen
at fresh air inlet is intact.
Summary of Contents for 2006 SX4
