Automatic Transmission/Transaxle: 5A-19
Visual Inspection
S6RW0C5104002
Visually check the following parts and systems.
Malfunction Indicator Lamp (MIL) Check
S6RW0C5104003
Refer to the same item in “Malfunction Indicator Lamp (MIL) Check in Section 1A” for checking procedure.
Transmission Warning Light Check (Non-Euro-OBD Model)
S6RW0C5104042
1) Turn ignition switch ON.
2) Check that transmission warning light lights for about 2 – 4 sec. and then goes OFF.
If anything faulty is found, advance “Transmission Warning Light Circuit Check – Light Does Not Come “ON” at
Ignition Switch ON (Non-Euro-OBD Model)” or “Transmission Warning Light Circuit Check – Light Remains “ON”
at Ignition Switch ON (Non-Euro-OBD Model)”.
Inspection item
Referring section
• A/T fluid – level, leakage, color
“A/T Fluid Level Check”
• A/T fluid hoses – disconnection, looseness,
deterioration
“A/T Fluid Cooler Hoses Inspection”
• A/T select cable – installation
“Select Cable Removal and Installation”
• Engine oil – level, leakage
“Engine Oil and Filter Change in Section 0B”
• Engine coolant – level, leakage
“Engine Coolant Change in Section 0B”
• Engine mountings – play, looseness, damage
“Engine Assembly Removal and Installation in Section 1D”
• Suspension – play, looseness
“Suspension, Wheels and Tires Symptom Diagnosis in
Section 2A”
• Drive shafts – damage
“Front Drive Shaft Assembly Removal and Installation in
Section 3A”
• Battery – indicator condition, corrosion of terminal
• Connectors of electric wire harness – disconnection,
friction
“Electronic Shift Control System Components Location”
• Fuses – burning
• Parts – installation, damage
• Bolts – looseness
• Other parts that can be checked visually
Also check the following items at engine start, if possible.
• Malfunction indicator lamp – Operation
“Malfunction Indicator Lamp (MIL) Check”
• Transmission warning light – Operation
“Transmission Warning Light Check (Non-Euro-OBD
Model)”
• Charge warning light – Operation
“Generator Symptom Diagnosis in Section 1J”
• Engine oil pressure warning light – Operation
“Oil Pressure Warning Light Symptom Diagnosis in Section
9C”
• Engine coolant temp. meter – Operation
• Other parts that can be checked visually
1. MIL
I5RW0C510009-01
Summary of Contents for 2006 SX4
