Suzuki 2006 SX4, Service Manual

Page: 698 / 1478

5A-110 Automatic Transmission/Transaxle:
Forward and Direct Clutch Inspection
S6RW0C5106043
1) Check that sliding surfaces of friction, separator and
retaining plates are not worn or burnt. If necessary,
replace.
NOTE
• If friction plate lining is exfoliated,
discolored or worn hardly, replace all
friction plates.
• Before assembling new friction plates,
soak them in A/T fluid for at least two
hours.
2) Measure height of direct clutch piston return spring.
Forward clutch return spring height
Standard: 23.59 mm (0.93 in.)
NOTE
Do not apply excessive force when
measuring spring height. Perform
measurement at several points.
3) Check that ball makes creaking noise when shaking
forward clutch piston and direct clutch piston. (i.e.,
check that ball is free.)
4) Check that there is no leakage from backside of oil
hole (1) by applying low pressure air.
I2RH01510147-01
I2RH01510148-01
I2RH01510149-01