Suzuki 2006 SX4, Service Manual

Page: 522 / 1478

4A-11 Brake Control System and Diagnosis:
Master Cylinder and Brake Booster Components
S6RW0C4106010
CAUTION
!
Never disassemble master cylinder and brake booster. Disassembly will spoil its original function.
If faulty condition is found, replace it with new one.
Master Cylinder Reservoir Removal and
Installation
S6RW0C4106011
CAUTION
!
Do not allow brake fluid to get on painted
surfaces. Painted surfaces will be damaged
by brake fluid, flush it with water immediately
if any fluid is spilled.
Removal
1) Clean outside of reservoir and master cylinder.
2) Disconnect fluid level switch coupler (1) and clamp
(3) from reservoir (2).
4
2
2
1
(b)
10
9
8
7
11
12
6
3
5 (a)
I7RW01410017-03
1. Reservoir 6. O-ring 11. Brake vacuum hose
: Be sure to direct location mark (12) to upward as shown in figure.
2. Grommet
: Apply brake fluid.
7. Brake booster : 18N
⋅
m (1.8kgf-m, 13.0 lb-ft)
3. Master cylinder 8. Clevis pin : 13N
⋅
m (1.3kgf-m, 9.5lb-ft)
4. Reservoir connect pin 9. Clip : Do not reuse.
5. Master cylinder fixing nut 10. Gasket : Apply grease to piston rod
(Grease included in spare parts to master cylinder or brake booster.)
2
1
3
I7RW01410009-01