background image

 

iArmor

®

 

Customer Support: [email protected] 

 

Rev. 20201201 

 

 

iArmor

®

 by APS

 

 

PART#:

 

IA

S159

 

BEFORE INSTALLATION 
 

REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE 
PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE 
STARTING INSTALLATION. ASSISTANCE IS RECOMMEND-
ED. THANK YOU FOR CHOOSING OUR PRODUCT!  

Fastener Size 

Tightening Torque (ft-lbs) 

6mm 

6-7 

8mm 

16-18 

10mm 

31-32 

12mm 

56-58 

14mm 

92-94 

PART LIST 

Driver Side Step Bar  

Passenger Side Step Bar  

Front 

Driver Center Mounting 
Bracket (DFM/DCM/PRM)  

Driver Rear Mounting 
Bracket (PFM/PCM/DRM)

  

 

Passenger Center 
Mounting Bracket 
(PFM/PCM/DRM)

 

 

Passenger Rear 
Mounting Bracket 

 

(DFM/DCM/PRM)  

X1 

X1 

X1 

X1 

PART LIST 

Driver Side Step Bar  

Passenger Side Step Bar  

Front 

Driver Front Mounting 
Bracket (DFM/DCM/PRM)  

Passenger Front 
Mounting Bracket 
(PFM/PCM/DRM)

 

 

X1 

X1 

*Driver Front Mounting Bracket , Driver Center Mounting and 
Passenger Rear Mounting Bracket are Universal.  

*Passenger Front Mounting Bracket , Passenger Center 
Mounting Bracket and Driver Rear Bracket are Universal.  

Summary of Contents for iArmor IA-S159

Page 1: ...de Step Bar Passenger Side Step Bar Front Driver Center Mounting Bracket DFM DCM PRM Driver Rear Mounting Bracket PFM PCM DRM Passenger Center Mounting Bracket PFM PCM DRM Passenger Rear Mounting Bracket DFM DCM PRM X1 X1 X1 X1 PART LIST Driver Side Step Bar Passenger Side Step Bar Front Driver Front Mounting Bracket DFM DCM PRM Passenger Front Mounting Bracket PFM PCM DRM X1 X1 Driver Front Mount...

Page 2: ...6 M8 Large Flat Washer X18 M8 Lock Washer X6 U Bracket X6 X12 Spacer Fig 2 Driver Front Mounting Bracket Installation Fig 1 Driver Front Mounting Bracket Location Pictured 2 M8 Large Flat Washers 2 M8X1 25 Nylon Lock Nuts Front Select 1 Driver Front Mounting Bracket NOTE Driver Front Mounting Bracket Driver Center Mounting Bracket and Passenger Rear Mounting Bracket are universal Attach the Mounti...

Page 3: ...hers and 3 M8X1 25 Hex Nuts Fig 5 Do not fully tighten hardware at this time Fig 5 Driver Side Step Bar Installed Front DFM DCM DRM NOTE Torque all M8 X1 25 55mm Car riage Bolts to 16 18 Ib ft Don t over tighten or the aluminum square bars will be damaged by the brackets M8X1 25 55mm Carriage Bolt U Bracket Spacers M8 Large Flat Washer M8 Lock washer M8X1 25 Hex Nut Fig 4 Driver Rear Mounting Brac...

Page 4: ...e sure that all hardware is secure and tight In order to protect your bars boards please use only mild soap non abrasive products for cleaning STEP 5 Properly level and adjust the Step Bar and fully tighten all hard ware STEP 6 Move to the passenger side of the vehicle Repeat Steps 1 5 to install passenger side step bar Installation completed Fig 6 ...

Reviews: