Suzuki 2006 SX4, Service Manual

Page: 1313 / 1478

Wipers / Washers: 9D-11
Rear Wiper Relay Inspection
S6RW0C9406013
1) Check that there is no continuity between terminal
“3” and “4”. If there is continuity, replace relay.
2) Connect battery positive (+) terminal to terminal “2”
of relay.
3) Connect battery negative (–) terminal to terminal “1”
of relay.
4) Check continuity between terminal “3” and “4”. If
there is no continuity when relay is connected to the
battery, replace relay.
Specifications
Tightening Torque Specifications
S6RW0C9407001
NOTE
The specified tightening torque is also described in the following.
“Wipers and Washers Components”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fasteners Information in Section 0A”.
“4”
“2”
“1”
“3”
I4RS0A940028-01
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lb-ft
Windshield wiper bolt 8 0.8 6.0 )
Windshield wiper arm nut 18 1.8 13.0 )
Rear wiper motor mounting bolt 8 0.8 6.0 )
Rear wiper nut 5 0.5 4.0 )
Rear wiper arm nut 8 0.8 6.0 )