Suzuki 2006 SX4, Service Manual

Page: 633 / 1478

Automatic Transmission/Transaxle: 5A-45
DTC P0722: Output Speed Sensor Circuit No Signal
S6RW0C5104024
Wiring Diagram
DTC Detecting Condition and Trouble Area
DTC Confirmation Procedure
WARNING
!
• When performing a road test, select a place where there is no traffic or possibility of a traffic
accident and be very careful during testing to avoid occurrence of an accident.
• Road test should be carried out with 2 persons, a driver and tester, on a level road.
1) Clear DTC.
2) Warm up engine to normal operating temperature.
3) Shift select lever to “D” range and drive vehicle at 70 km/h (44 mile/h) or more vehicle speed at least for 30
seconds.
4) Stop vehicle and check DTC.
2.5V
6 5
16 15 14 13 12 11
4 3
24 23 21 22
10 9 8 7
2 1
19 20 18 17
C06
17 16
26 25
15 14
6 5 3 4 2
13 12
23 22 24
11 10 9
21 20 19
8 7
18
1
C07
C07-5
C07-14
WHT
BLK
1
2
3
I7RW01510011-01
1. TCM 3. Terminal arrangement of TCM connector (viewed from harness side)
2. Output shaft speed sensor
DTC detecting condition Trouble area
Pulse signals of output shaft speed sensor are not input
although pulse signals of input shaft speed sensor are input
while vehicle is running.
(1 driving cycle detection logic) • Output shaft speed sensor or its circuit malfunction.
• Improper output shaft speed sensor installation.
• Damaged sensor rotor.
• Foreign material attachment to sensor or rotor.
• TCM