Suzuki 2006 SX4, Service Manual

Page: 779 / 1478

Clutch: 5C-5
Clutch Pedal Position (CPP) Switch Inspection
and Adjustment
S6RW0C5306005
Inspection
Check for resistance between terminals under each
condition below. If check result is not satisfactory,
replace.
CPP switch resistance
When switch shaft is pushed (1): Continuity
When switch shaft is free (2): No continuity
Adjustment
With clutch pedal (1) depressed, adjust switch (2)
position so that clearance between end of thread and
clutch pedal arm is within specification and then tighten
lock nut to specified torque.
Clearance between end of thread and clutch pedal
arm
“a”: 1.5 – 2.0 mm (0.06 – 0.08 in.)
Tightening torque
CPP switch lock nut (a): 7.5 N·m (0.75 kgf-m, 5.5 lb-
ft)
Clutch Fluid Pipe and Hose Location
S6RW0C5306006
I5JB0A530006-01
“a”
2
1
(a)
I7RW01530004-02
4
[A]
3
1
3
1
2
2
4
I5RW0A530003-02
[A]: RH steering vehicle 3. Clutch reservoir hose
1. Clutch master cylinder 4. Brake master cylinder reservoir
2. Clutch fluid pipe