Suzuki 2006 SX4, Service Manual

Page: 83 / 1478

Engine General Information and Diagnosis: 1A-39
For Vehicle Equipped with A/T
NOTE
There are two types of OBD system depending on the vehicle specification.
For identification, refer to “Precaution on On-Board Diagnostic (OBD) System”.
When using CAN communication OBD generic scan tool, not only the previous star (*) marked ECM DTC(s) but also
the following DTC(s) is displayed on CAN communication OBD generic scan tool simultaneously.
DTC No. Detecting item
Detecting condition
(DTC will set when
detecting:)
Driving
cycle when
MIL lighted
P0602 Control Module Programming Error
Refer to “DTC Table in Section 5A”.
P0705 Transmission Range Sensor Circuit Malfunction (P R N D L Input)
P0707 Transmission Range Sensor Circuit Low
P0711
Transmission Fluid Temperature Sensor “A” Circuit Range/
Performance
P0712 Transmission Fluid Temperature Sensor “A” Circuit Low
P0713 Transmission Fluid Temperature Sensor “A” Circuit High
P0717 Input Speed Sensor “A” Circuit No Signal
P0722 Output Speed Sensor Circuit No Signal
P0741 Torque Converter Clutch Circuit Performance or Stuck Off
P0742 Torque Converter Clutch Circuit Stuck On
P0751 Shift Solenoid “A” Performance or Stuck Off
P0752 Shift Solenoid “A” Stuck On
P0756 Shift Solenoid “B” Performance or Stuck Off
P0757 Shift Solenoid “B” Stuck On
P0961 Pressure Control Solenoid “A” Control Circuit Range/ Performance
P0962 Pressure Control Solenoid “A” Control Circuit Low
P0963 Pressure Control Solenoid “A” Control Circuit High
P0973 Shift Solenoid “A” Control Circuit Low
P0974 Shift Solenoid “A” Control Circuit High
P0976 Shift Solenoid “B” Control Circuit Low
P0977 Shift Solenoid “B” Control Circuit High
P1702 Internal Control Module Memory Check Sum Error
P1723 Range Select Switch Malfunction
P2763
Torque Converter Clutch Pressure Control Solenoid Control Circuit
High
P2764
Torque Converter Clutch Pressure Control Solenoid Control Circuit
Low
U0073 Control Module Communication Bus Off
U0100 Lost Communication With ECM / PCM “A”