Suzuki 2006 SX4, Service Manual

Page: 61 / 1478

Engine General Information and Diagnosis: 1A-17
Connector: E01
20 GRN/WHT Ignition coil No.2 50 RED
CAN (high) communication line
(active high signal) to TCM
21 GRN/YEL Ignition coil No.1 51 PNK CKP sensor (+)
22 YEL/GRN Starting motor signal 52 RED/YEL CMP sensor signal
23 — — 53 RED
Output for 5 V power source of
TP sensor
24 LT GRN ECT sensor signal 54 GRN TP sensor (main) signal
25 LT GRN/BLK IAT sensor signal 55 — —
26 PNK/BLK MAF sensor signal 56 RED Knock sensor signal
27 GRY Ground for MAF sensor 57 GRY/BLU Ground for sensors
28 BLU/YEL Generator control signal output 58 BLK/ORN Ground for ECM
29 BLK Ground for ECM 59 — —
30 BLK Ground for ECM 60 — —
Terminal Wire color Circuit Terminal Wire color Circuit
Terminal Wire color Circuit Terminal Wire color Circuit
1 BLK/RED Main power supply 31 — —
2 WHT/RED
Power source for ECM internal
memory
32 — —
3 — — 33 — —
4 RED
CAN (high) communication line
(active high signal) to ABS
control module
34 — —
5 — — 35 BLU/WHT
Electric load signal for heater
blower motor
6 RED/WHT
Cruise control main switch
signal
36 ORN Ground for sensor
7 LT GRN/BLK
Clutch pedal position switch
signal (cruise control model)
37 — —
8 GRN/YEL
Brake pedal position switch
(cruise control model)
38 — —
9 — — 39 — —
10 — — 40 — —
11 — — 41 WHT/BLK
A/C evaporator outlet air temp.
sensor signal (Manual A/C
model)
12 — — 42 — —
13 YEL/RED
Clock signal for immobilizer
coil antenna
43 — —
14 — — 44 BRN
Engine speed signal output for
P/S control module
15 GRN/WHT Fuel pump relay output 45 — —
16 BLK/RED Main power supply 46 LT GRN
Radiator cooling fan relay No.1
output
17 GRN
Power supply of throttle
actuator drive circuit
47 GRN
Radiator cooling fan relay
No.2/No.3 output
18 — — 48 RED/BLK
A/C condenser cooling fan
relay output
19 WHT
CAN (low) communication line
(active low signal) to ABS
control module
49 GRY A/C compressor relay output
20 GRN/WHT Brake light switch signal 50 BRN
Throttle actuator control relay
output
21 BLK/YEL
Cruise control command
switch ground
51 WHT Ground for APP sensor (sub)
22 LT GRN
Cruise control command
switch signal
52 YEL APP sensor (sub) signal
23 — — 53 RED
Output for 5 V power source of
APP sensor (sub)