General Information: 0A-6
In raising front or rear vehicle end off the floor by jacking,
be sure to put the jack against engine front mounting
member (1) or rear jacking bracket (2).
To perform service with either front or rear vehicle end
jacked up, be sure to place safety stands (1) under
shaded position of vehicle body (front) or body mounting
stay (2) (rear) so that vehicle body is securely supported.
And then check to ensure that vehicle body does not
slide on safety stands (1) and the vehicle is held stable
for safety’s sake.
Vehicle Identification Number
S6RW0C0101006
The number is punched on the front dash panel in
engine room and it is also attached on the left side of
instrument panel depending on the vehicle specification.
Engine Identification Number
S6RW0C0101007
The number is punched on cylinder block.
Transmission Identification Number
S6RW0C0101008
The automatic transmission identification number is
located on transmission case.
[A]: Front
3. Cap
[B]: Rear
1
2
I5RW0A010002-02
1
2
[B]
[A]
1
3
I5RW0A010003-03
I5RW0C010002-01
I3RH01010003-01
I4RS0A010008-01
Summary of Contents for 2006 SX4
