Suzuki 2006 SX4, Service Manual

Page: 534 / 1478

4B-7 Front Brakes:
Installation
1) Install caliper assembly to steering knuckle.
CAUTION
!
Make sure that flexible hose is not twisted
when installing caliper assembly. If it is
twisted, reinstall it using care not to twist it.
2) Torque caliper carrier bolts to specification.
Tightening torque
Caliper carrier bolt (a): 85 N·m (8.5 kgf-m, 61.5
lb-ft)
3) Install front wheel referring to “Wheel (with Tire)
Removal and Installation in Section 2D”.
4) Perform brake test.
Front Brake Disc Inspection
S6RW0C4206009
• Using magnetic stand and with dial gauge positioned
at about 10 mm (0.39 in.) inward from periphery of
disc, measure deflection of disc.
If it exceeds the limit, correct or replace the brake
disc.
Front brake disc deflection
Limit: 0.10 mm (0.004 in.) max.
Special tool
(A): 09900–20607
(B): 09900-20701
• Using micrometer, measure thickness of brake disc.
If it is less than limit, replace brake disc.
Front brake disc thickness
Standard: 22.0 mm (0.87 in.)
Limit: 20.0 mm (0.79 in.)
I4RS0B420012-01
I4RS0B420013-01
I4RS0B420014-01