10C-13 Immobilizer Control System:
DTC P1622: EEPROM Reading / Writing Error
S6RW0CA304013
Detecting Condition and Trouble Area
Troubleshooting
1) Clear DTC(s) referring to “DTC Clearance”.
2) Turn the ignition switch to OFF position.
3) Check if DTC P1622 is still detected referring to “DTC Check”. If still detected, go to the next step. If not, the
troubleshooting is completed.
4) Replace ECM with new one referring to “Engine Control Module (ECM) Removal and Installation in Section 1C”.
5) Perform “Procedure after ECM Replacement”.
DTC P1623: Unregistered Transponder
S6RW0CA304014
Wiring Diagram
Refer to “Immobilizer Control System Wiring Circuit Diagram”.
Detecting Condition and Trouble Area
Troubleshooting
DTC P1625: Immobilizer Antenna Error
S6RW0CA304015
Wiring Diagram
Refer to “Immobilizer Control System Wiring Circuit Diagram”.
Detecting Condition and Trouble Area
Detecting Condition
Trouble Area
EEPROM in ECM is corrupted.
Internal failure (EEPROM corruption) of ECM
Detecting Condition
Trouble Area
Transponder code in the transponder built in the ignition
key is invalid.
• Use of the unregistered ignition key
• ICM
• ECM
Step
Action
Yes
No
1
Was “Immobilizer Control System Check” performed?
Go to Step 2.
Go to “Immobilizer
Control System Check”.
2
DTC check of ECM
1) Check if any DTC other than P1623 is detected referring
to “DTC Check”.
Is DTC other than P1623 detected?
Go to applicable DTC
diag. flow.
Go to Step 3.
3
Registration of unregistered ignition key with ECM
1) Register the unregistered ignition key with ECM referring
to “Registration of the Ignition Key”.
Was registration of ignition key completed?
Recheck DTC.
Go to Step 4.
4
Registration of the spare ignition key
1) Register the spare ignition key referring to “Registration
of the Ignition Key”.
Was registration of spare ignition key completed?
Replace ignition key
which cannot be
registered.
Substitute a known-
good ECM and recheck.
Detecting Condition
Trouble Area
ICM is faulty.
• ICM
• ECM
Summary of Contents for 2006 SX4
