Suzuki 2006 SX4, Service Manual

Page: 658 / 1478

5A-70 Automatic Transmission/Transaxle:
Select Cable Components
S6RW0C5106010
Select Cable Removal and Installation
S6RW0C5106011
Removal
1) Remove parking brake lever cover.
2) Remove console box.
3) Disconnect select cable from select lever and then
detach from bracket.
4) Remove clip and disconnect select cable from
manual shift.
5) Remove select cable retainer from dash panel.
Installation
Install select cable by reversing removal procedure.
The important steps in installation are as follows.
• Apply grease to pin and cable joint.
• Tighten bolts to specified torque referring to “Select
Cable Components”.
• Adjust select cable referring to “Select Cable
Adjustment”.
Select Cable Adjustment
S6RW0C5106012
1) Remove adjuster (cable end) from select lever pin of
select lever assembly.
2) Shift manual shift lever (1) to “N” range (transmission
range sensor “N” range) aligning arrow (2) of lever
(1) with “N” reference line (3).
11
3
6
5
4
12
2
1
10
9
8
(a)
A
7
A
(c)
(b)
I7RW01510034-01
1. Select lever assembly 6. Manual select lever pin
: Apply lithium grease 99000-25010 to all around pin (0.15 g)
11. Heater inlet hose
2. Select cable 7. Select lever pin
: Apply lithium grease 99000-25010 to all around pin (0.15 g)
12. Clamp
3. Cable bracket 8. Adjuster case : 23 N
⋅
m (2.0 kgf-m, 17.0 lb-ft)
4. Manual select lever 9. Lock : 6.5 N
⋅
m (0.65 kgf-m, 5.0 lb-ft)
5. Clip 10. EPS control module (EPS model) : 12 N
⋅
m (1.2 kgf-m, 8.0 lb-ft)
"L"
"2"
"D"
"R"
"N"
"P"
3
2
1
I4RH01510025-01