Suzuki 2006 SX4, Service Manual

Page: 650 / 1478

5A-62 Automatic Transmission/Transaxle:
Connector “C07”
Terminal Wire color Circuit
Standard
voltage
Condition
C07-1 RED
“R” range signal for
transmission range sensor
10 – 14 V
Ignition switch is at ON position and select lever is
at “R” range.
0 – 1 V
Ignition switch is at ON position and select lever is
at other than “R” range.
C07-2 — — — —
C07-3 — — — —
C07-4 — — — —
C07-5 WHT
Signal for output shaft
speed sensor
2 – 3 V Ignition switch is at ON position.
* (“Reference
waveform
No. 4: ”)
Vehicle is running.
(Output signal is pulse. pulse frequency varies
depending on output shaft speed.)
C07-6 BLK
Signal for input shaft speed
sensor
2 – 3 V Ignition switch is at ON position.
* (“Reference
waveform
No. 5: ”)
Engine is running at idle speed.
(Output signal is pulse. Pulse frequency varies
depending on output shaft speed.)
C07-7 GRN
“D” range signal for
transmission range sensor
10 – 14 V
Ignition switch is at ON position and select lever is
at “D” or “3” range.
0 – 1 V
Ignition switch is at ON position and select lever is
at other than “D” range.
C07-8 GRN/ORN
“N” range signal for
transmission range sensor
10 – 14 V
Ignition switch is at ON position and select lever is
at “N” range.
0 – 1 V
Ignition switch is at ON position and select lever is
at other than “N” range.
C07-9 YEL “3” position switch
10 – 14 V
Ignition switch is at ON position and select lever is
at other than “3” or “2” range.
0 – 1 V
Ignition switch is at ON position and select lever is
at “3” or “2” range.
C07-10 — — — —
C07-11 — — — —
C07-12 — — — —
C07-13 — — — —
C07-14 BLK
Ground for output shaft
speed sensor
0 – 3 V Ignition switch is at ON position.
C07-15 — — — —
C07-16 WHT
Ground for input shaft
speed sensor
0 – 3 V Ignition switch is at ON position.
C07-17 — — — —
C07-18
LT GRN/
BLK
“L” range signal for
transmission range sensor
10 – 14 V
Ignition switch is at ON position and select lever is
at “L” range.
0 – 1 V
Ignition switch is at ON position and select lever is
at other than “L” range.
C07-19 GRN/YEL
“2” range signal for
transmission range sensor
10 – 14 V
Ignition switch is at ON position and select lever is
at “2” range.
0 – 1 V
Ignition switch is at ON position and select lever is
at other than “2” range.
C07-20 PNK/BLK
“P” range signal for
transmission range sensor
10 – 14 V
Ignition switch is at ON position and select lever is
at “P” range.
0 – 1 V
Ignition switch is at ON position and select lever is
at other than “P” range.
C07-21 — — — —
C07-22 — — — —
C07-23 BLU Data link connector 10 – 14 V Ignition switch is at ON position.
C07-24 — — — —
C07-25 — — — —
C07-26 — — — —