1E-11 Engine Lubrication System:
Radial Clearance
Check radial clearance between outer rotor (2) and case
No.1 (1), using thickness gauge (4).
If clearance exceeds its limit, replace oil pump assembly.
Limit on radial clearance between outer rotor and
case
0.20 mm (0.0079 in.)
Side Clearance
Using straightedge (5) and thickness gauge (4),
measure side clearance.
If side clearance exceeds its limit, replace oil pump
assembly.
Limit on side clearance
0.11 mm (0.0043 in.)
Specifications
Tightening Torque Specifications
S6RW0C1507001
NOTE
The specified tightening torque is also described in the following.
“Oil Pan and Oil Pump Strainer Components”
“Oil Pump Components”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fasteners Information in Section 0A”.
3. Inner rotor
I2RH01150024-01
1. Oil pump case No.1
3. Inner rotor
2. Outer rotor
I2RH01150025-01
Fastening part
Tightening torque
Note
N
⋅
m
kgf-m
lb-ft
Oil pressure switch
13
1.3
9.5
)
Engine oil drain plug
35
3.5
25.5
)
Oil filter
14 N
⋅
m (1.4 kgf-m, 10.5 lb-ft) for reference
)
Oil pump strainer bolt
11
1.1
8.0
)
Oil pan bolt and nut
11
1.1
8.0
)
Transmission case No.1 bolt
55
5.5
40.0
)
Oil drain plug
35
3.5
25.5
)
Clutch housing plate upper bolt
30
3.0
22.0
)
Clutch housing plate lower bolt
11
1.1
8.0
)
Oil pump mounting bolt (M8 bolt)
25
2.5
18.0
)
Baffle plate bolt (M6 bolt)
11
1.1
8.0
)
Oil pump chain guide nut
11
1.1
8.0
)
Oil pump sprocket cover bolt
11
1.1
8.0
)
Oil pump relief valve retainer
28
2.8
20.5
)
Oil pump case bolt
12
1.2
9.0
)
Summary of Contents for 2006 SX4
