Suzuki 2006 SX4, Service Manual

Page: 701 / 1478

Automatic Transmission/Transaxle: 5A-113
4) Fit flat surface of thrust washer (1) to front planetary
ring gear with petroleum jelly so as not to fall washer
off when reassembling.
5) Install one-way No. 2 clutch (1).
6) Install snap ring, using flat head rod or the like.
7) Apply A/T fluid to outer surface of one-way No. 2
clutch race (1).
8) Install one-way No. 2 clutch race (1) to one-way No.
2 clutch (2).
9) Check that one-way No. 2 clutch (1) turns freely
when turned counterclockwise [A] and looks when
turned clockwise [B].
1st / Reverse Brake and One-Way No. 2 Clutch
Inspection
S6RW0C5106047
1) Check that sliding surfaces of friction, separator and
retaining plates are not worn or burnt. If necessary,
replace with a new one.
NOTE
• If friction plate lining is exfoliated,
discolored or worn hardly, replace all
friction plates.
• Before assembling new friction plates,
soak them in A/T fluid for at least two
hours.
2) Measure height of several 1st / reverse brake piston
return spring including plate.
1st / reverse brake piston return spring height
Standard: 19.55 mm (0.77 in.)
NOTE
Do not apply excessive force when
measuring spring height or it is not
measured accurately.
1
I4RH01510136-01
1
1
I4RH01510137-01
1
2
I4RH01510138-01
[B] [A]
1
I4RH01510130-01
I2RH01510147-01
I2RH01510162-01