Suzuki 2006 SX4, Service Manual

Page: 899 / 1478

Air Conditioning System: Manual Type 7B-34
f) Read stroke of armature plate from dial gauge by
performing step d) and e) repeatedly. (Stroke of
armature plate is clearance between armature
plate and magnet clutch pulley.)
Standard clearance between armature plate
and magnet clutch pulley:
0.3 – 0.5 mm (0.012 – 0.020 in.)
Thermal Switch Inspection
S6RW0C7216024
Measured thermal switch for resistance at 20
°
C (68
°
F)
Thermal switch resistance
Standard: 50 m
Ω
(DC 16 V, 5A at 20
°
C (68
°
F))
Thermal Switch Removal and Installation
S6RW0C7216025
Removal
1) Remove compressor from engine referring to
“Compressor Assembly Removal and Installation”.
2) Disconnect thermal switch connector.
3) Remove magnet clutch lead wire clamp.
4) Remove thermal switch (1) from compressor using
flat head (2).
Installation
Reverse removal procedure noting the following
instructions.
• Apply silicon sealant to contact face (2) of thermal
switch (1).
“A”: Silicon sealant 99000–34220 (SUZUKI
SILICON SEALANT KE-347W (100g))
• Install compressor to vehicle referring to “Compressor
Assembly Removal and Installation”.
• Evacuate and charge the A/C system referring to
“Evacuation” and “Charge” in “Operation Procedure
for Refrigerant Charge”.
2
1
3
I4RS0A720046-01
I7RW01721024-01
2
1
I5RS0C721011-01
3
2, “A”
1
I5RS0C721012-02