Immobilizer Control System: 10C-12
DTC P1621: Immobilizer Communication Line Error
S6RW0CA304012
Wiring Diagram
Refer to “Immobilizer Control System Wiring Circuit Diagram”.
Detecting Condition and Trouble Area
Troubleshooting
Detecting Condition
Trouble Area
Communication error between ICM and ECM.
• Related fuse(s) blown
• Poor connection at ICM connector
• Poor connection at ECM connector
• Power supply circuit
• Ground circuit
• Communication circuits between ICM and ECM
• ICM
• ECM
Step
Action
Yes
No
1
Was “Immobilizer Control System Check” performed?
Go to Step 2.
Go to “Immobilizer
Control System Check”.
2
Fuse check
1) Check fuse for ICM circuit.
Is fuse in good condition?
Replace blown fuse(s)
and then, check for
short circuit.
Go to Step 3.
3
Voltage check at power and ground terminal
1) Check power and ground terminal voltage of ICM
connector referring to “Inspection of ICM and Its Circuit”.
Is each terminal voltage in good condition?
Go to Step 4.
Repair circuit.
4
ICM and ECM connector check
1) With the ignition switch at OFF position, check
intermittent and poor connection of ICM connector and
ECM connectors referring to “Intermittent and Poor
Connection Inspection in Section 00”.
Is each connector in good condition?
Go to Step 5.
Repair poor connection.
5
Communication circuit check between ICM and ECM
1) Check for open, short and high resistance in serial
communication and clock circuit between ICM and ECM.
Is each communication circuit in good condition?
Substitute a known-
good ICM and recheck.
If DTC P1621 is still
detected, substitute a
known good ECM and
recheck.
Repair circuit.
Summary of Contents for 2006 SX4
