Suzuki 2006 SX4, Service Manual

Page: 1269 / 1478

Lighting Systems: 9B-25
With auto-on headlight switch
Hazard Warning Switch Removal and
Installation
S6RW0C9206006
Removal
1) Disconnect negative (–) cable at battery.
2) Remove center ventilation louver (1) referring to
“Center Ventilation Louver Removal and Installation
in Section 7A”.
3) Disconnect coupler, and then remove hazard
warning switch (2) from center ventilation louver (1)
while releasing the locks (3).
Installation
Reverse removal procedure for installation.
Hazard Warning Switch Inspection
S6RW0C9206007
Check for continuity between terminals at each switch
position. If check result is not as specified, replace
switch.
Brake Light Switch Inspection
S6RW0C9206008
Check brake light switch for continuity between terminals
at each switch position.
If check result is not as specified, replace switch.
Turn Signal Light Switch (in Lighting Switch)
Removal and Installation
S6RW0C9206009
For removal and Installation, refer to “Headlight Switch
(in Lighting Switch) Removal and Installation”.
[A]: Terminal
[B]: Shaft condition
5 4 3 2 1 6 7
1 4 3 5 6
LOW
PASS
HI
LOW
PASS
HI
LOW
PASS
HI
LOW
PASS
HI
2 7
[A]
[B]
I6RW0C920019-01
1
3
2
I5RW0A920009-01
Terminal
Switch
OFF
ON
1 2 3 4
1
2
3
4
I5RW0C920004-01
Terminal
Shaft condition
FREE
PUSH
1 2 3 4
4
2
3
1
I5RW0A920010-01