Suzuki 2006 SX4, Service Manual

Page: 686 / 1478

5A-98 Automatic Transmission/Transaxle:
12) Remove oil pump plate (1), driven gear (2) and drive
gear (3).
13) Remove O-ring.
14) Remove oil pump oil seal (1), using special tool.
Special tool
(A): 09913–50121
NOTE
Never reuse removed oil seal.
Reassembly
1) Press-fit new oil pump oil seal (1) using special tool
and hammer and then apply grease to its lip portion.
Special tool
(A): 09913–85210
: Grease 99000–25030 (SUZUKI Super Grease C)
2) After applying A/T fluid to gears, install driven gear
(1) and drive gear (2) to oil pump body (3) aligning
marks on the gears.
3) Apply A/T fluid to new O-ring (4) and install it to oil
pump body.
4) Install oil pump plate (5).
5) Install stator shaft (1) to oil pump body and tighten
bolts (2) to specification.
Tightening torque
Oil pump cover bolts (a): 6.5 N·m (0.65 kgf-m,
4.7 lb-ft)
Oil pump cover bolts (b): 12 N·m (1.2 kgf-m, 8.7
lb-ft)
6) After applying A/T fluid to new O-rings and install it to
2nd brake piston.
7) Press 2nd brake piston into starter shaft.
NOTE
Do not twist or deviate O-rings during
installation.
1
2
3
I4RH01510097-01
(A)
1
I4RH01510098-01
(A)
1
I4RH01510099-01
1
2
3
5
4
I4RH01510100-01
2, (b)
2, (b)
2, (b)
2, (a)
2, (b)
1
I4RH01510096-01
I4RH01510101-01