Suzuki 2006 SX4, Service Manual

Page: 465 / 1478

Differential: 3B-27
Terminal arrangement of 4WD control module connector (Viewed from harness side)
1 2 3 4 5 6 7 8 9 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24 25 26
I4JA01332054-01
Terminal
Number
Wire Color Circuit
Normal
Voltage
Condition
G26-1 — — — —
G26-2 GRN
Coupling assembly
(ground)
About 5 V Ignition switch turned ON position
G26-3 YEL
Coupling assembly
(power)
10 – 12 V
• Run engine at idle speed and 2WD/4WD switch at
4WD lock position
• Selector lever at “P” or “N” range (A/T model)
*0 – 12 V
(“Reference
waveform
No.1: ”)
• Run engine at idle speed and 2WD/4WD switch at
4WD lock position
• Selector lever at other than “P” or “N” range (A/T
model) or depress accelerator pedal (M/T model)
About 5 V Above-mentioned condition
G26-4 — — — —
G26-5 — — — —
G26-6 — — — —
G26-7 — — — —
G26-8 — — — —
G26-9 — — — —
G26-10 BLK Ground 0 – 1 V —
G26-11 WHT/RED
Power source for
internal memory
10 – 14 V —
G26-12 RED/BLK Power source 10 – 14 V Ignition switch turned ON position
G26-13 RED/WHT 4WD switch
0 – 1 V
Ignition switch turned ON position and 2WD/4WD
switch at 4WD auto or 4WD lock position
10 – 14 V
Ignition switch turned ON position and 2WD/4WD
switch at 2WD position
G26-14 GRN/YEL 4WD lock switch
0 – 1 V
Ignition switch turned ON position and 2WD/4WD
switch kept pushing at 4WD lock position
10 – 14 V
Ignition switch turned ON position and 2WD/4WD
switch released at 4WD lock position
G26-15 — — — —
G26-16 — — — —
G26-17 — — — —
G26-18 — — — —
G26-19 — — — —
G26-20 — — — —
G26-21 BLU
Data link connector
(DLC)
10 – 14 V Ignition switch turned ON position
G26-22 RED
CAN communication
line (High)
*2.5 – 3.6 V
(“Reference
waveform
No.2: ”)
Ignition switch turned ON position
G26-23 WHT
CAN communication
line (Low)
*1.6 – 2.5 V
(“Reference
waveform
No.2: ”)
Ignition switch turned ON position