Suzuki 2006 SX4, Service Manual

Page: 367 / 1478

Charging System: 1J-10
Generator Dismounting and Remounting
S6RW0C1A06006
Dismounting
1) Disconnect negative (–) cable at battery.
2) Remove water pump and generator drive belt
referring to “Water Pump and Generator Drive Belt
Removal and Installation”.
3) Remove air cleaner case referring to “Air Cleaner
Assembly Removal and Installation in Section 1D”.
4) Remove intake manifold referring to “Intake Manifold
Removal and Installation in Section 1D”.
5) Remove generator cover (1).
6) Disconnect “B” terminal wire (2) and coupler (3) from
generator.
7) Remove generator mounting bolt (4) and generator
pivot bolt (5) from generator.
8) Remove generator (6) from engine.
Remounting
Reverse dismounting procedure, noting the following.
• Tighten each bolts and nuts to specified torque.
Tightening torque
“B” terminal nut (a): 5 N·m (0.5 kgf-m, 4.0 lb-ft)
Generator mounting bolt (b): 25 N·m (2.5 kgf-m, 18.5
lb-ft)
Generator pivot bolt (c): 52.5 N·m (5.25 kgf-m, 38.0
lb-ft)
4
2
1
3
6
5
I7RW011A0003-01
(b)
(a)
(c)
I7RW011A0004-01