Suzuki 2006 SX4, Service Manual

Page: 426 / 1478

3A-1 Drive Shaft / Axle: Front
Driveline / Axle
Drive Shaft / Axle
Front
General Description
Front Drive Shaft Construction
S6RW0C3111001
A constant velocity ball joint is used on the wheel side of both right and left side drive shaft assemblies. A tripod type
constant velocity joint is used on the differential side and center shaft side. The drive shaft can slide through the tripod
joint in the extension/contraction direction.
Component Location
Front Drive Shaft Assembly Components Location
S6RW0C3113001
I6RW0C311001-01
1. To transaxle 7. Wheel nut : 200 N
⋅
m (20.0 kgf-m, 145.0 lb-ft)
2. Drive shaft assembly 8. Center shaft assembly (if equipped) : 85 N
⋅
m (8.5 kgf-m, 61.5 lb-ft)
3. Tie-rod end 9. Center bearing support bolts (if equipped) : 55 N
⋅
m (5.5 kgf-m, 40.0 lb-ft)
4. Tie-rod end nut 10. Washer : Do not reuse.
5. Ball stud bolt : 45 N
⋅
m (4.5 kgf-m, 32.5 lb-ft)
6. Drive shaft nut
: After tightening nut to specified torque,
caulk nut securely.
: 60 N
⋅
m (6.0 kgf-m, 43.5 lb-ft)