Suzuki 2006 SX4, Service Manual

Page: 651 / 1478

Automatic Transmission/Transaxle: 5A-63
Reference waveform No. 1
Signal of pressure control solenoid valve.
Reference waveform No. 2
Signal of TCC pressure control solenoid valve.
Reference waveform No. 3
High and low of CAN communication signals.
Reference waveform No. 4
Signal of output shaft speed sensor.
Measurement
terminal
CH1: “C06-4” to “C06-2”
Oscilloscope
setting CH1: 5 V/DIV
TIME: 2 ms/DIV
Measurement
condition Engine running at specified idle
speed after warmed up engine.
Measurement
terminal
CH1: “C06-5” to “C06-1”
Oscilloscope
setting CH1: 10 V/DIV
TIME: 10 ms/DIV
Measurement
condition Drive vehicle at 60 km/h (37 mile/h)
or higher after warmed up engine.
I7RW01510019-01
I7RW01510020-01
Measurement
terminal CH1: “C06-7” to “C06-1”
CH2: “C06-17” to “C06-1”
Oscilloscope
setting CH1: 1 V/DIV, CH2: 1 V/DIV
TIME: 40
µ
s/DIV
Measurement
condition
Ignition switch is at ON position.
1. CAN communication line signal (high)
2. CAN communication line signal (low)
Measurement
terminal
CH1: “C07-5” to “C06-1”
Oscilloscope
setting CH1: 2 V/DIV
TIME: 4 ms/DIV
Measurement
condition Drive vehicle at 40 km/h (25 mile/h)
after warmed up engine.
I7RW01510021-01
I7RW01510022-01