Suzuki 2006 SX4, Service Manual

Page: 640 / 1478

5A-52 Automatic Transmission/Transaxle:
DTC P0973 / P0976: Shift Solenoid “A” Control Circuit Low / Shift Solenoid “B” Control Circuit Low
S6RW0C5104031
Wiring Diagram
3 Check pressure control solenoid valve resistance
1) Turn ignition switch to OFF position.
2) Disconnect valve body harness connector (1) on
transaxle.
3) Check for proper connection to “LT GRN/BLK” and
“GRY” terminals of valve body harness connector.
4) Check resistance of pressure control solenoid valve.
Resistance of pressure control solenoid valve
Between (3) and (4) terminals of valve body harness
connector: 3.3 – 3.7
Ω
at 20
°
C (68
°
F)
Between (3) terminal of valve body harness
connector and vehicle body ground (2): Infinity
Is check results satisfactory?
Intermittent trouble or
faulty TCM. Check for
intermittent referring to
“Intermittent and Poor
Connection Inspection
in Section 00”. If OK,
substitute a known-
good TCM and recheck. Replace pressure
control solenoid valve or
lead wire.
Step Action Yes No
1
3
4
2
I7RW01510013-01
1. Shift solenoid valve–A (No. 1) 3. TCM
2. Shift solenoid valve–B (No. 2) 4. Terminal arrangement of TCM connector (viewed from harness side)
6 5
16 15 14 13 12 11
4 3
24 23 21 22
10 9 8 7
2 1
19 20 18 17
C06
17 16
26 25
15 14
6 5 3 4 2
13 12
23 22 24
11 10 9
21 20 19
8 7
18
1
C07
C06-15 BLK/YEL
12V
C06-16
BRN
12V
1
2
1
4
3
I7RW01510014-01