Keyless Start System: 10E-27
Repair Instructions
Antennas and Request Switches Removal and Installation
S6RW0CA506001
Remove and install antennas and request switches referring to the following figures.
3
Wire harness check
1) Disconnect connector from keyless start control module.
2) Check for open, short and high resistance in related door
request switch circuit.
Is each circuit in good condition?
Substitute a known-
good keyless start
control module and
recheck.
Repair circuit.
Step
Action
Yes
No
[A]
[B]
[D]
[C]
[E]
1
4
5
2
3
I5RW0AA50014-01
[A]: Front door antenna and request switch (included in outside
door handle assembly)
1. Outside handle assembly
: Antenna and request switch can not be removed from outside door handle assembly
[B]: Rear end door opener and request switch assembly
2. Rear end opener and request switch
[C]: Rear end door antenna
3. Rear bumper
[D]: Center antenna
4. Parking brake lever
[E]: Luggage room antenna
5. Tail end member trim
Summary of Contents for 2006 SX4
