Suzuki 2006 SX4, Service Manual

Page: 215 / 1478

Aux. Emission Control Devices: 1B-2
Repair Instructions
EVAP System Components
S6RW0C1206001
EVAP Canister Purge Inspection
S6RW0C1206002
NOTE
Before inspection, check to make sure that
gear shift lever is in neutral position (with A/T
model, selector lever in “P” range) and that
parking brake lever is pulled all the way up.
1) Disconnect purge hose (1) from purge valve
chamber.
2) Place finger against the end of disconnected hose
and check that vacuum is not felt there when engine
is cool and running at idle speed. If check result is
not satisfactory, check EVAP canister purge valve,
wire harness and ECM.
I6RW0C120001-01
1. EVAP canister 7. Purge hose No.1 13. Clamp
2. EVAP canister bracket 8. Purge pipe No.1 14. Vapor control hose
3. Suction hose 9. Purge pipe No.2 15. To intake manifold
4. EVAP canister purge valve 10. EVAP canister purge hose 16. To fuel tank
5. EVAP canister purge valve bracket 11. Purge valve chamber 17. To fuel filler neck
6. Purge hose No.3 12. Purge hose No.2 : 5 N
⋅
m (0.5 kgf-m, 4.0 lb-ft)
1
I7RW01120001-01