Suzuki 2006 SX4, Service Manual

Page: 726 / 1478

5A-138 Automatic Transmission/Transaxle:
73) Install transaxle housing to transaxle case by 15
tightening bolts to specified torque.
Tightening torque
Transaxle case bolt: 29 N·m (2.9 kgf-m, 20.98 lb-
ft)
NOTE
Make sure to use new transaxle housing
bolts B and C.
74) Install one-way No. 1 clutch assembly (1) into oil
pump assembly (2).
75) Check for correct installation of each component
parts as follows.
Measure the distance “a” by using vernier (1) and
straight edge (2). If distance is out of specification,
remove one-way No. 1 clutch assembly (3) and
install them properly.
Distance between upper edge of one-way No. 1
clutch to oil pump plate
“a”: 51.1 – 51.7 mm (2.012 – 2.035 in.)
76) Apply A/T fluid to O-ring and install oil pump
assembly (1) by 8 tightening bolts to specified
torque.
NOTE
Do not twist or deviate O-ring during
installation.
Tightening torque
Oil pump body bolt: 25 N·m (2.5 kgf-m, 18.08 lb-
ft)
Bolt Size Length (mm) Pieces
A M8 30 9
B M8 30 4
C M8 35 2
D M8 45 1
E M8 Torx
®
T40 30 1
A
B
E
A
A
A
A
A
A
A
A
D
B
B
C
C
B
I4RH01510230-01
1
2
I4RH01510231-01
1
2
3
"a"
I4RH01510232-01
1
I4RH01510233-01