Suzuki 2006 SX4, Service Manual

Page: 394 / 1478

2B-9 Front Suspension:
4) Remove caliper carrier bolts and then caliper (1) with
carrier.
NOTE
Hang removed caliper with a wire hook or the
like (3) so as to prevent brake hose (4) from
bending, twisting or tension.
Do not depress brake pedal during caliper
removal.
Don’t operate brake pedal with caliper
removed.
5) Pull brake disc (2) off by using two 8 mm bolts.
6) Pull out wheel hub (1) with special tools.
Special tool
(A): 09943–17912
(B): 09942–15511
CAUTION
!
When wheel hub is removed, replace wheel
bearing with new one.
7) Disconnect tie-rod end (1) from steering knuckle (2)
with puller (3).
8) Remove wheel speed sensor (1) from knuckle.
9) Loosen strut bracket nuts (1).
10) Remove ball joint bolt (4) and washer (3).
11) Remove strut bracket bolts (5) from strut bracket and
then steering knuckle (2).
12) Uncaulk and remove dust cover (1).
I5JB0A220014-01
I2RH01220028-01
1
2
3
1
I4RS0A220017-01
F: Vehicle front
1
I5RW0A220013-01
F
5
2
1
3
4
I7RW01220004-01
I2RH01220032-01