Suzuki 2006 SX4, Service Manual

Page: 320 / 1478

1F-9 Engine Cooling System:
5) Remove cooling fan mounting bolts (1).
6) Remove radiator cooling fan assembly (2).
Installation
Reverse removal procedure for installation noting the
following.
• Refill cooling system referring to Step 9) to 17) of
“Cooling System Flush and Refill”.
• After installation, verify there is no coolant leakage at
each connection.
Radiator Cooling Fan Disassembly and
Reassembly
S6RW0C1606012
Disassembly
1) Remove fan (1) from cooling fan motor (2).
2) Remove fan motor (2) from cooling fan guide (3).
Reassembly
Reverse disassembly procedures for reassembly.
Radiator On-Vehicle Inspection and Cleaning
S6RW0C1606013
Inspection
Check radiator for leakage or damage. Straighten bent
fins, if any.
Cleaning
Clean frontal area of radiator cores.
Radiator Removal and Installation
S6RW0C1606014
Removal
1) Disconnect negative (–) cable at battery.
2) Drain coolant referring to “Cooling System Draining”.
3) Remove front bumper referring to “Front Bumper
and Rear Bumper Components in Section 9K”.
4) Drain A/T fluid.
5) Remove A/T fluid cooler inlet and outlet hoses.
6) Remove cooling fan assembly referring to “Radiator
Cooling Fan Assembly Removal and Installation”.
7) Remove condenser cooling fan referring to
“Condenser Cooling Fan Removal and Installation in
Section 7B”.
8) Remove radiator outlet hose from radiator.
9) Fix condenser to body with rope in order to avoid the
condenser fall off when remove radiator.
10) Remove radiator from vehicle.
Installation
Reverse removal procedures, noting the following.
• Refill cooling system referring to Step 9) to 17) of
“Cooling System Flush and Refill”.
• Refill A/T fluid referring to “A/T Fluid Change in
Section 5A”.
• After installation, verify there is no coolant leakage
each connection.
I7RW01160006-01
I5RW0C160005-01
I2RH01160014-01