Suzuki 2006 SX4, Service Manual

Page: 601 / 1478

Automatic Transmission/Transaxle: 5A-13
Non-Euro-OBD Model
1. Shift Point in “D”, “3” and/or “2” range
2. Lock-up point in “D” and/or “3” range
NOTE
The gear change is done at the shift point different from the above while any of the following control
functions is working. Bear this in mind when performing inspection.
• Slope Shift Control
When the AT controller makes up-slope judgment, Slope Shift Control (on up-slope) is executed by
changing the gear change point to the high-speed side so as to reduce frequent up-shift and
downshift operations.
• Cruise Shift Control
Cruise Shift Control is executed by selecting appropriate gear according to requirement for
retaining a constant vehicle speed or acceleration so as to reduce frequent up-shift and down-shift
operations while cruising.
Throttle
opening (%)
Shift Vehicle speed km/h (mph) Remark
UP shift
Over 90%
1st
→
2nd 57 – 62 (35 – 39)
2nd
→
3rd 112 – 117 (70 – 73)
3rd
→
4th 173 – 178 (108 – 111)
50%
1st
→
2nd 30 – 35 (19 – 22)
2nd
→
3rd 48 – 53 (30 – 33)
3rd
→
4th 71 – 76 (44 – 47)
10%
1st
→
2nd 14 – 19 (9 – 12)
2nd
→
3rd 25 – 30 (16 – 19)
3rd
→
4th 40 – 45 (25 – 28)
DOWN shift
Over 90%
4th
→
3rd 162 – 167 (101 – 104)
3rd
→
2nd 107 – 112 (66 – 70)
2nd
→
1st 42 – 48 (26 – 30)
50%
4th
→
3rd 63 – 68 (39 – 42)
3rd
→
2nd 25 – 30 (16 – 19)
2nd
→
1st 8 – 13 (5 – 8)
0%
4th
→
3rd 23 – 28 (14 – 17) With applying brake pedal (coast
down condition)
3rd
→
2nd 8 – 13 (5 – 8)
2nd
→
1st 8 – 13 (5 – 8)
Lock-up
clutch status
Throttle
opening (%)
Vehicle speed km/h (mph) Remark
3rd gear lock-up
ON
Over 80% 148 – 153 (92 – 95)
3 range only
50% 71 – 76 (44 – 47)
OFF
Over 85% 123 – 128 (76 – 80)
50% 53 – 58 (33 – 36)
4th gear lock-up
ON
Over 80% 168 – 173 (104 – 108)
50% 71 – 76 (44 – 47)
OFF
Over 85% 157 – 162 (98 – 101)
50% 67 – 72 (42 – 45)