Suzuki 2006 SX4, Service Manual

Page: 863 / 1478

Heater and Ventilation: 7A-11
Installation
Reverse removal procedure noting the following
instruction.
• Be sure to insert the linkage rod (1) into the hole (2) of
air intake control actuator.
Air Intake Control Actuator Inspection
S6RW0C7106013
Check air intake control actuator as follows:
1) Using service wire, connect battery positive terminal
to “d” terminal and battery negative terminal to
terminal “a”. And, check if air intake selector link
operates smoothly and it stops at “FRE” position (1).
2) Using service wire, connect battery positive terminal
to “d” terminal and battery negative terminal to
terminal “c”. And, check if air intake selector link
operates smoothly and it stops at “REC” position (2).
3) For auto A/C model, using service wire, connect
battery positive terminal to “d” terminal and battery
negative terminal to “b” terminal. And, check air
intake selector link operates smoothly and it stops at
MIX position (3).
If malfunction is found, replace air intake control
actuator.
2
1
I7RW01710017-02
4. Motor rotation direction
“a” “b” “c” “d”
1
3
2
4
“a”
“b”
“c”
“d”
I7RW01710018-05