manualshive.com logo in svg

Suzuki 2006 SX4, Service Manual

The Suzuki 2006 SX4 Service Manual is available for free download at manualshive.com. This comprehensive manual provides detailed instructions and diagrams to help you maintain and repair your SX4. Get the manual today and keep your Suzuki running smoothly.

Share
Download
background image

8-ii Table of Contents

DTC B1062 / B1066: Side-Air Bag Circuit Low 

Resistance ......................................................8B-59

DTC B1063 / B1067: Side-Air Bag Circuit 

Shorted to Ground ..........................................8B-61

DTC B1064 / B1068: Side-Air Bag Circuit 

Shorted to Power Supply ................................8B-64

DTC B1071: Driver Forward Impact-Sensor 

Communication Data Inconsistent ..................8B-66

DTC B1072: Driver Forward Impact-Sensor 

Communication Data Invalid ...........................8B-66

DTC B1073: Driver Forward Impact-Sensor 

Circuit Shorted to Ground ...............................8B-67

DTC B1074: Driver Forward Impact-Sensor 

Circuit Open ....................................................8B-68

DTC B1081 / B1091: Side Impact-Sensor No 

Response ........................................................8B-70

DTC B1082 / B1092: Side Impact-Sensor 

Communication DATA Invalid .........................8B-70

DTC B1083 / B1093: Side Impact-Sensor 

Circuit Shorted to Ground ...............................8B-71

DTC B1084 / B1094: Side Impact-Sensor 

Circuit Open ....................................................8B-73

DTC B1085 / B1095: Side Impact-Sensor 

Communication DATA Inconsistent ................8B-74

DTC B1361 / B1365: Curtain-Air Bag Circuit 

High Resistance ..............................................8B-75

DTC B1362 / B1366: Curtain-Air Bag Circuit 

Low Resistance...............................................8B-79

DTC B1363 / B1367: Curtain-Air Bag Circuit 

Shorted to Ground ..........................................8B-81

DTC B1364 / B1368: Curtain-Air Bag Circuit 

Shorted to Power Supply ................................8B-83

SDM Power Supply and Ground Circuit 

Check..............................................................8B-85

Contact Coil Cable and Its Circuit Check ..........8B-87
Inspection of Intermittent and Poor 

Connections ....................................................8B-89

Repair and Inspection Required after 

Accident ..........................................................8B-90

Repair Instructions ............................................8B-93

Disabling Air Bag System..................................8B-93
Enabling Air Bag System ..................................8B-93
SDM Removal and Installation..........................8B-94
SDM Inspection.................................................8B-95
Driver Air Bag (Inflator) Module Removal and 

Installation .......................................................8B-95

Driver Air Bag (Inflator) Module Inspection .......8B-97
Passenger Air Bag (Inflator) Module Removal 

and Installation ................................................8B-97

Passenger Air Bag (Inflator) Module 

Inspection........................................................8B-99

Side-Air Bag (Inflator) Module Removal and 

Installation .......................................................8B-99

Side-Air Bag (Inflator) Inspection ....................8B-101
Side Curtain-Air Bag (Inflator) Module 

Removal and Installation...............................8B-102

Side Curtain-Air Bag (Inflator) Module 

Inspection......................................................8B-103

Forward Impact-Sensor Removal and 

Installation .....................................................8B-103

Forward Impact-Sensor Inspection .................8B-104
Side Impact-Sensor Removal and Installation 8B-105
Side Impact-Sensor Inspection .......................8B-105
Passenger Air Bag (Inflator) Module Repair 

Harness Installation.......................................8B-106

Air Bag (Inflator) Module and Seat Belt 

Pretensioner Disposal ...................................8B-107

Deployed Air Bag (Inflator) Module and 

Activated Seat Belt Pretensioner Disposal....8B-117

Specifications ...................................................8B-118

Tightening Torque Specifications....................8B-118

Special Tools and Equipment .........................8B-118

Use of Special Tools .......................................8B-118
Special Tool ....................................................8B-120

Summary of Contents for 2006 SX4







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2006 SX4

Jeep Automobile Service And Warranty Handbook preview
Automobile
Brand: Jeep Pages: 42
Jeep Automobile Warranty Information Booklet preview
Automobile
Brand: Jeep Pages: 44
Cadillac ATS 2015 Convenience/Personalization Manual preview
ATS 2015
Brand: Cadillac Pages: 20
Jeep Automobile Service Contract preview
Automobile
Brand: Jeep Pages: 7
Cadillac 2016 ELR Convenience/Personalization Manual preview
2016 ELR
Brand: Cadillac Pages: 20
Cadillac 2016 CTS Manual preview
2016 CTS
Brand: Cadillac Pages: 354
Cadillac 2005 CTS Personalization Manual preview
2005 CTS
Brand: Cadillac Pages: 20
Cadillac 2014 XTS Convenience/Personalization Manual preview
2014 XTS
Brand: Cadillac Pages: 20
Cadillac ATS 2014 Specifications preview
ATS 2014
Brand: Cadillac Pages: 10
Cadillac 2013 Escalade ESV Owner'S Manual preview
2013 Escalade ESV
Brand: Cadillac Pages: 524
Cadillac 2013 ATS Personalization Manual preview
2013 ATS
Brand: Cadillac Pages: 20
Cadillac ATS 2013 Owenrs Manual preview
ATS 2013
Brand: Cadillac Pages: 438
Cadillac 2013 ATS Owner'S Manual preview
2013 ATS
Brand: Cadillac Pages: 450
Cadillac 2011 Escalade Hybrid Owner'S Manual Addendum preview
2011 Escalade Hybrid
Brand: Cadillac Pages: 94
Cadillac 2011 Escalade Hybrid Owner'S Manual preview
2011 Escalade Hybrid
Brand: Cadillac Pages: 94
Cadillac 2011 CTS COUPE Navigation Manual preview
2011 CTS COUPE
Brand: Cadillac Pages: 78
Cadillac 2011 CTS COUPE Brochure preview
2011 CTS COUPE
Brand: Cadillac Pages: 8
Cadillac 2010 Escalade Manual preview
2010 Escalade
Brand: Cadillac Pages: 113

Brands by name

Popular brands

Load more brands