Suzuki 2006 SX4, Service Manual

Page: 771 / 1478

Manual Transmission/Transaxle: 5B-39
4) Press-fit right bearing (1) by using special tools and
hydraulic press.
Special tool
(A): 09925–15410
(B): 09924–07720
(C): 09913–85230
5) Hold differential assembly with soft jawed vise (3),
install final gear (2) and then tighten new final gear
bolts (1).
CAUTION
!
Use of any other bolts than specified ones is
prohibited. Otherwise, bolts may loosen.
Tightening torque
Final gear bolt (a): 90 N·m (9.0 kgf-m, 65.0 lb-ft)
Specifications
Tightening Torque Specifications
S6RW0C5207001
NOTE
The specified tightening torque is also described in the following.
“Gear Shift Control Lever and Cable Components”
“Manual Transaxle Unit Components”
“Gear Shift and Select Shaft Assembly Components”
“Manual Transaxle Assembly Components”
“Gear Shift Shaft Components”
“Differential Components”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fasteners Information in Section 0A”.
2. Differential case
3. Differential side left bearing
I5RW0A520048-01
I5RW0A520049-01
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lb-ft
Transaxle oil level / filler plug 21 2.1 15.5 ) / )
Transaxle oil drain plug 21 2.1 15.5 )
Back up light switch 23 2.3 17.0 )
Guide case bolt No.1 23 2.3 17.0 )
Guide case bolt No.2 23 2.3 17.0 )
Gear shift interlock bolt 23 2.3 17.0 )
5th to reverse interlock guide bolt 23 2.3 17.0 )
Countershaft nut 100 10.0 75.0 )
Shift fork shaft bolt 10 1.0 7.5 )
Side cover bolt 10 1.0 7.5 )
Reverse gear shift lever bolt 23 2.3 17.0 )
Transaxle case bolt 23 2.3 17.0 )
Reverse shaft bolt 21 21 15.5 )
Gear shift locating bolt 13 1.3 9.5 )
Left case plate bolt 23 2.3 17.0 )
Oil gutter bolt 10 1.0 7.5 )
Final gear bolt 90 9.0 65.0 )