manualshive.com logo in svg

Suzuki 2006 SX4, Service Manual

The Suzuki 2006 SX4 Service Manual is available for free download at manualshive.com. This comprehensive manual provides detailed instructions and diagrams to help you maintain and repair your SX4. Get the manual today and keep your Suzuki running smoothly.

Share
Download
background image

Table of Contents 9-v

Rear End Door Opener System Operation 

Inspection (If Equipped) .................................... 9F-5

Repair Instructions .............................................. 9F-6

Front Door Lock Assembly Components ............ 9F-6
Front Door Lock Assembly Removal and 

Installation......................................................... 9F-6

Front Door Lock Assembly Inspection ................ 9F-8
Power Door Lock Switch Inspection (If 

Equipped).......................................................... 9F-8

Door Key Cylinder Switch Inspection (If 

Equipped).......................................................... 9F-8

Power Door Lock Actuator Inspection (If 

Equipped).......................................................... 9F-9

Rear Door Lock Assembly Components ........... 9F-10
Rear Door Lock Assembly Removal and 

Installation....................................................... 9F-10

Rear Door Lock Assembly Inspection ............... 9F-10
Rear End Door Lock Assembly Components.... 9F-11
Rear End Door Lock Assembly Removal and 

Installation....................................................... 9F-12

Rear End Door Lock Assembly Inspection........ 9F-12
Rear End Door Opener Switch Inspection (If 

Equipped)........................................................ 9F-13

Replacement of Transmitter Battery (Other 

than Keyless Start Model)............................... 9F-13

Programming Transmitter Code for Keyless 

Entry System (Other than Keyless Start 
Model) ............................................................. 9F-14

Keyless Entry Answer Back Function 

Change-over Procedure (If Equipped) ............ 9F-14

Keyless Entry Receiver Removal and 

Installation (If Equipped) ................................. 9F-14

Keyless Entry Receiver and Its Circuit 

Inspection (If Equipped) .................................. 9F-15

Specifications..................................................... 9F-16

Tightening Torque Specifications...................... 9F-16

Special Tools and Equipment ........................... 9F-16

Recommended Service Material....................... 9F-16

Seats ......................................................... 9G-1

Repair Instructions ..............................................9G-1

Front Seat Components......................................9G-1
Front Seat Removal and Installation...................9G-2
Rear Seat Components ......................................9G-2
Rear Seat Removal and Installation ...................9G-3

Specifications.......................................................9G-3

Tightening Torque Specifications........................9G-3

Special Tools and Equipment .............................9G-3

Recommended Service Material.........................9G-3

Interior Trim ............................................. 9H-1

Repair Instructions ..............................................9H-1

Floor Carpet Removal and Installation................9H-1

Head Lining Removal and Installation.................9H-2
Console Box Components ..................................9H-3

Specifications.......................................................9H-4

Tightening Torque Specifications........................9H-4

Hood / Fenders / Doors ............................9J-1

Repair Instructions .............................................. 9J-1

Hood Removal and Installation ........................... 9J-1
Hood Inspection and Adjustment ........................ 9J-1
Front Fender Components .................................. 9J-2
Front Fender Removal and Installation ............... 9J-2
Front Door Assembly Components ..................... 9J-3
Front Door Assembly Removal and 

Installation ......................................................... 9J-3

Rear Door Assembly Components...................... 9J-5
Rear Door Assembly Removal and 

Installation ......................................................... 9J-5

Rear End Door Assembly Components .............. 9J-6
Rear End Door Assembly Removal and 

Installation ......................................................... 9J-7

All Latches, Hinges and Locks Inspection........... 9J-8

Specifications....................................................... 9J-8

Tightening Torque Specifications........................ 9J-8

Special Tools and Equipment ............................. 9J-8

Recommended Service Material ......................... 9J-8

Body Structure......................................... 9K-1

Repair Instructions ..............................................9K-1

Front Bumper and Rear Bumper Components ....9K-1
Cowl Top and Front Lower Crossmember 

Components......................................................9K-2

Specifications.......................................................9K-3

Body Dimensions ................................................9K-3
Panel Clearance................................................9K-10
Tightening Torque Specifications......................9K-10

Paint / Coatings ........................................9L-1

General Description ............................................. 9L-1

Anti-Corrosion Treatment Construction............... 9L-1
Plastic Parts Finishing......................................... 9L-1

Component Location ........................................... 9L-2

Sealant Application Areas ................................... 9L-2
Under Coating Application Areas ........................ 9L-9
Anti-Corrosion Compound Application Area ..... 9L-11

Exterior Trim ............................................9M-1

Repair Instructions ............................................. 9M-1

Roof Molding Removal and Installation.............. 9M-1
Splash Guard Removal and Installation (If 

Equipped)......................................................... 9M-2

Specifications...................................................... 9M-2

Tightening Torque Specifications....................... 9M-2

Summary of Contents for 2006 SX4







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2006 SX4

ZAPTEC Go Instruction Manual preview
Go
Brand: ZAPTEC Pages: 240
Camcar 40052 Mounting Instructions preview
40052
Brand: Camcar Pages: 6
Kargo Master 80070 Assembly Lnstructions preview
80070
Brand: Kargo Master Pages: 13
Kargo Master 4A96L Installation Manual preview
4A96L
Brand: Kargo Master Pages: 21
Kargo Master 40201 Installation Manual preview
40201
Brand: Kargo Master Pages: 4
M7 SPEED R56 Installation Manual preview
R56
Brand: M7 SPEED Pages: 11
DAF PACCAR PACMOBILE 20 User Manual preview
PACCAR PACMOBILE 20
Brand: DAF Pages: 18
Ecco EC4210B-K Installation And Operation Instructions Manual preview
EC4210B-K
Brand: Ecco Pages: 9
Paccar DAF CHARGEMAX 90 User Manual preview
DAF CHARGEMAX 90
Brand: Paccar Pages: 40
Audi 2011 A3 Sportback Pricing And Specification Manual preview
2011 A3 Sportback
Brand: Audi Pages: 29
Jaeger 12020523 Fitting Instructions Manual preview
12020523
Brand: Jaeger Pages: 11
Vangear Woody-Pod Instruction Manual preview
Woody-Pod
Brand: Vangear Pages: 5
Safe Fleet FRC SafeTrack Hardware Installation Manual preview
FRC SafeTrack
Brand: Safe Fleet Pages: 20
Volvo 1989 780 Owner'S Manual preview
1989 780
Brand: Volvo Pages: 123
Kleinn RS-GM6 Installation Manual preview
RS-GM6
Brand: Kleinn Pages: 8
Ford Fusion 2019 Supplement Manual preview
Fusion 2019
Brand: Ford Pages: 51
GMC 2008 Savana Van Owner'S Manual preview
2008 Savana Van
Brand: GMC Pages: 402
JBA 1528S Installation Instructions And Warranty Information preview
1528S
Brand: JBA Pages: 5

Brands by name

Popular brands

Load more brands