Fuel System: 1G-14
5) Hoist vehicle, and remove clamp (2), fuel filler hose
(1) and breather hose (3) from fuel filler neck.
6) Remove EVAP canister referring to “EVAP Canister
Removal and Installation in Section 1B”.
7) Remove exhaust center pipe referring to “Exhaust
Pipe and Muffler Removal and Installation in Section
1K”.
8) Remove propeller shaft (4WD model) referring to
“Propeller Shaft Assembly Removal and Installation
in Section 3D”.
9) Due to absence of fuel tank drain plug, drain fuel
tank by pumping fuel out through fuel tank filler.
Use hand operated pump device to drain fuel tank.
CAUTION
!
• Do not force pump hose into fuel tank.
• Never store fuel in an open container due
to possibility of fire or explosion.
10) Disconnect quick joint (1) from fuel pipes (2)
referring to “Fuel Hose Disconnecting and
Reconnecting”.
11) Support fuel tank (1) with jack (2) and remove its
mounting bolts (3).
12) Lower fuel tank a little as to disconnect wire harness
at connector (1) and ground wire (2), then remove
fuel tank.
1
2
3
I7RW01170014-01
2
1
I5RW0A170014-02
1
2
3
3
I5RW0A170013-01
1
2
I7RW01170009-01
Summary of Contents for 2006 SX4
