Suzuki 2006 SX4, Service Manual

Page: 708 / 1478

5A-120 Automatic Transmission/Transaxle:
Planetary Gear Disassembly and Reassembly
S6RW0C5106054
Disassembly
Rear planetary ring gear assembly
1) Remove snap ring (1) using flat end rod or the like.
2) Remove rear planetary ring gear flange (2) from rear
planetary ring gear (3).
Reassembly
Rear planetary ring gear assembly
1) Install rear planetary ring gear flange (1) to rear
planetary ring gear (2).
2) Install snap ring (3).
Planetary Gear Inspection
S6RW0C5106055
Rear Planetary Ring Gear Assembly
Visually check the following parts for scratches or
discoloration.
• Inner surface of planetary ring gear.
Planetary Front Gear
Measure inside diameter of planetary front gear (1)
bushing, using special tools. If inside diameter exceeds
limit, replace planetary front gear.
Planetary front gear bushing inside diameter limit
30.13 mm (1.186 in.)
Special tool
(A): 09900–20607
(B): 09900–22403
NOTE
Perform measurement at several points.
Planetary Sun Gear
Measure inside diameter of planetary sun gear (1)
bushing, using special tools. If inside diameter exceeds
limit, replace planetary sun gear.
Planetary sun gear bushing inside diameter limit
21.58 mm (0.849 in.)
Special tool
(A): 09900–20607
(B): 09900–22403
NOTE
Perform measurement at several points.
1
2
3
I4RH01510151-01
1
2
3
I4RH01510151-01
(A)
(B)
1
I4RH01510152-01
(A)
(B)
1
I4RH01510153-01