Suzuki 2006 SX4, Service Manual

Page: 862 / 1478

7A-10 Heater and Ventilation:
Blower Speed Selector Inspection
S6RW0C7106010
Check blower speed selector for each terminal to
terminal continuity. If check result does not meet the
following conditions, replace HVAC control unit.
Air Intake Selector Inspection
S6RW0C7106011
• Check that there is continuity between terminal (1)
and terminal (2) when air intake selector is at “FRE”
position.
• Check that there is no continuity between terminal (1)
and terminal (2) when air intake selector is at “REC”
position.
If check result does not meet the above conditions,
replace HVAC control unit.
Air Intake Control Actuator Removal and
Installation
S6RW0C7106012
Removal
1) Disconnect negative cable from battery.
2) Remove glove box from instrument panel.
3) Remove passenger side foot duct (1) from HVAC
unit by removing screw (2). (LH steering vehicle
only.)
4) Disconnect connector (1) from air intake control
actuator (2).
5) Detach linkage rod (3) and remove air intake control
actuator (2) by removing screws (4).
I H MH
GND
L ML
Position
Terminal
I
OFF
1
2
3
4
L ML MH H GND
I4RS0A710019-01
1 2
I5RW0A710007-01
1
2
I7RW01710007-01
3
1
2
4
I7RW01710016-02