Tube Doors
Installation & Use Instructions:
For '07 - '18 Wranglers (JK) Front or Rear
PARTS LIST (Front)
Nylon Door Check Straps (2)
Door Pin Bracket (4)
M8 Bolt 1.25 x 20MM (8)
M8 Nylock Nut (8)
M8 Flat Washer (8)
REQUIRED TOOLS
Safety Glasses
5MM Hex Key
10MM Wrench
13MM Wrench
T50 Torx Socket
T40 Torx Socket
Ratchet
TO REDUCE RISK OF SERIOUS
INJURY OR PROPERTY DAMAGE:
READ ALL SAFETY MESSAGES
AND UNDERSTAND ALL INSTRUCTIONS AND PROCEDURE NOTICES BEFORE
ATTEMPTING TO INSTALL OR USE THIS PRODUCT.
THESE DOORS ARE NOT
INTENDED TO PROTECT
OR CONTAIN THE VEHICLE
OCCUPANTS OR PREVENT INJURY OR DEATH IN THE EVENT OF AN
ACCIDENT.
WEAR SEAT BELTS AT
ALL TIMES.
PERIODICALLY CHECK AND
ADJUST ALL LATCHES AND
FASTENERS, FAILURE TO DO SO
COULD RESULT IN THE DOORS NOT LATCHING SECURELY.
RISK OF EYE INJURY! SAFETY
GLASSES MUST BE WORN
AT ALL TIMES WHILE
INSTALLING OR MAINTAINING THIS PRODUCT. DO NOT USE IF DAMAGED.
PARTS LIST (Rear)
Nylon Door Check Straps (2)
Door Pin Bracket upper (2)
Door Pin Bracket Lower (2)
M8 Bolt 1.25 x 20MM (8)
M8 Nylock Nut (8)
M8 Flat Washer (8)
