background image

System overview

This document instructs MD30 mobile sensor installation for the RoadAI systems and the other data
collection systems.

Mobile sensor 

MD30

Bluetooth 

module enclosure

RoadAI mobile app

RoadAI online map

MD30 and Vaisala RoadAI system

MD30 and other data collection system

Mobile sensor 

MD30

In-cabin data 

collection system

Online server

Other MD30 instructions include:
1.

Vaisala Mobile Detector MD30 Product and Package Description Reference Guide

2.

Vaisala Mobile Detector MD30 Maintenance and Troubleshooting Reference Guide

For RoadAI system:
1.

RoadAI provisioning setup

2.

RoadAI with MD30 Usage Instructions (available in the Help section of RoadAI online map)

For other data collection system:
1.

Vaisala Mobile Detector MD30 Interface Description

Hand tools not supplied by Vaisala. For more information, see 

Vaisala Mobile Detector MD30 Product

and Package Description Reference Guide

.

If you have trouble setting up MD30, see 

Vaisala Mobile Detector MD30 Maintenance and

Troubleshooting Reference Guide

 and 

https://www.vaisala.com/en/support/md30

.

M212169EN-D

Setup Guide

Installation and Calibration

Vaisala Mobile Detector MD30

PUBLISHED BY
Vaisala Oyj
Vanha Nurmijärventie 21
FI-01670 Vantaa, Finland
© Vaisala 2020

All rights reserved. Any logos and/or product names are trademarks of Vaisala or its individual partners.
Any reproduction, transfer, distribution or storage of information contained in this document is strictly
prohibited. All specifications — technical included — are subject to change without notice.

Summary of Contents for MD30

























Reviews: