ENG
User’s Manual for MD19 Roof Box
STANDARD LOCK
Dear customer,
We are so pleased and honoured by your decision to buy our roof box. We hope you will find this
box useful and joy to use. However, it is of high importance that you read carefully this user’s
manual before fitting the roof box and follow these instructions during the assembly operations.
BEFORE FIITING THE ROOF BOX
This ULTRAPLAST MD 19 roof box is good for all the standard roof racks with the rails of the
following size:
width : max 95 mm
height : 15 - 40 mm
First of all, attach a roof rack to the roof (follow the assembly instructions of the respective
manufacturer). For perfect stability, the distance between the rack rails should be the longest
possible. When used on a 5-door car with the rear door opening upwards, place the roof rack
the way it is possible to freely open the rear (trunk) door.
FITTING THE ROOF BOX
The roof box is equipped with a fit-on system which allows for fast and easy assembly with no need
for any extra tools.
Place the roof box parallel onto the roof rack and attach the fitting elements (follow the figure
below). The anchoring straps must be placed under the plate between the supplied U-shaped
anchor arms.
1.
roof rack
2.
roof box
3.
locking bracket / U- anchor
4.
plate
5.
locking bolt nut
6. anchoring strap/belt
