Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 8 / 813

1145.1084.02 RE.8 E-6
New Features in Firmware V1.50 (Compared to V1.02)
ƒ
Support for new option: Calibration Unit (accessory R&S ZV-Z51)
ƒ
New measurement: x dB compression point
ƒ
New calibration types: TRM, TRL, TNA
ƒ
Arbitrary values for differential and common mode reference impedances (in Measurement
Wizard and Balanced and Measured Ports dialog)
ƒ
GUI improvements
ƒ
In the User Interface tab of the System Config. dialog, the Dialog Transparency can be varied
on a scale between 0% and 100%.
ƒ
Del Error Log is no longer an Info menu command but only displayed when the error log is
viewed.
ƒ
Limits for the marker search range, the trace evaluation range and the bandfilter search range
can be displayed in the diagrams.
ƒ
Incremented marker range within sweep range.
ƒ
Miscellaneous
ƒ
User-defined color schemes for the diagram areas and all display elements.
ƒ
Improved S-Parameter Wizard (with reference impedance settings for balanced ports, more
bandwidths, automatic calibration)and Calibration Wizard.
ƒ
In the User Interface tab of the System Config. dialog, Keep Measurement Data for >Repeat
Previous Cal< can be set as a general parameter.
ƒ
The added Redo function reverses the action of the Undo command.
ƒ
Instrument settings can be changed while a new sweep is being prepared.
ƒ
New remote control features
The new features are also available via remote control; the SCPI commands are reported in the
relevant reference sections. Besides the following new remote-control features are new or have
no equivalent in manual control:
ƒ
Automatic calibration with arbitrary ports and user-supplied cal kit files
(
[SENSe<Ch>:]CORRection:COLLect:AUTO).
ƒ
Lock command execution until an application program run on the analyzer is terminated:
PROGram[:SELected]:WAIT
.
Fixed Bugs
The following bugs came to our attention and have been fixed:
ƒ
Setups can be stored to external storage media (USB memory sticks, floppy disks) without
restriction.