Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 535 / 813

R&S
®
ZVA/ZVB/ZVT CALCulate
1145.1084.12 6.73 E-6
Example:
*RST; CALC:LIM:UPP 1 GHZ, 2 GHZ
Define an upper limit line segment in the stimulus range between 1
GHz and 2 GHz, using default response values.
CALC:LIM:SEG:TYPE LMIN
Turn the defined limit line segment into a lower limit line segment.
CALCulate<Ch/Tr>:LIMit:SOUNd[:STATe]
Switches the acoustic signal (fail beep) on or off. The fail beep is generated each time the analyzer
detects an exceeded limit.
<Ch/Tr> Channel number used to identify the active trace.
<Boolean> ON | OFF - Fail beep on or off.
*RST value OFF
SCPI, Command Types Confirmed, command or query.
Example:
CALC:LIM:STAT ON; SOUN ON
Switch the limit check on and activate the fail beep.
CALCulate<Ch/Tr>:LIMit:STATe
Switches the limit check (including upper and lower limits) on or off.
Use
CALCulate<Ch/Tr>:LIMit:UPPer:STATe
or
CALCulate<Ch/Tr>:LIMit:LOWer:STATe
to switch on or off the individual limit checks for upper or
lower limit lines.
<Ch/Tr> Channel number used to identify the active trace.
<Boolean>
ON | OFF - Limit check on or off.
*RST value OFF
SCPI, Command
Types Confirmed, command or query.
Example:
*RST; CALC:LIM:CONT 1 GHZ, 2 GHZ
Define an upper limit line segment in the stimulus range between 1
GHz and 2 GHz, using default response values.
CALC:LIM:STAT ON; CALC:LIM:FAIL?
Switch the limit check on and query the result.