Rohde & Schwarz 1145.1010.04/05/06, Operating Manual

Page: 257 / 813

R&S
®
ZVA/ZVB/ZVT Trace Menu
1145.1084.12 4.95 E-6
Remote control:
CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion:EXECute LPEak
CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion:RESult?
Target
Opens a submenu to search for a specific value on the trace.
•
Target Search activates the search for the target value.
•
Target Search > activates the search for the target value to the right of the active marker.
•
< Target Search activates the search for the target value to the left of the active marker.
•
Target Value specifies the target value.
•
Search Range confines the search to a subrange of the sweep.
Target Search
Activates the search and sets the active marker to the defined target value. If the active trace contains
no markers, a marker Mkr 1 is created to indicate the search result.
If the target value occurs at several stimulus values, the marker is placed to the search result with the
smallest stimulus value. The other measurement points with the same target value can be located using
the
Target Search > function.
If the target is not found (e.g. because the active trace doesn't contain the target value), then the active
marker is not moved away from its original position.
Remote control: CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion:EXECute TARGet
CALCulate<Ch/Tr>:MARKer<Mk>:FUNCtion:RESult?